|
|
PCB's overall
sq. inches |
2-9 |
10-19 |
20-29 |
30-39 |
40-54 |
55-69 |
70-110 |
|
Lot of 2 boards |
$443.36 |
$470.40 |
$487.04 |
$502.64 |
$518.24 |
$543.20 |
$567.12 |
|
Lot of 4 boards |
$468.32 |
$507.84 |
$535.92 |
$562.96 |
$590.00 |
$617.04 |
$646.16 |
|
Lot of 6 boards |
$488.08 |
$546.32 |
$575.44 |
$627.44 |
$666.96 |
$710.64 |
$789.68 |
|
Lot of 8 boards |
$509.92 |
$583.76 |
$633.68 |
$683.60 |
$744.96 |
$808.40 |
$861.44 |
|
Lot of 10 boards |
$529.68 |
$621.20 |
$682.56 |
$748.08 |
$817.76 |
$874.96 |
$956.08 |
|
Lot of 16 boards |
$549.44 |
$661.76 |
$757.44 |
$859.36 |
$966.48 |
$1079.84 |
$1182.80 |
|
Lot of 24 boards |
$580.64 |
$707.52 |
$842.72 |
$978.96 |
$1120.40 |
$1252.48 |
$1375.20 |
NRE = $150
|
*All orders will be reviewed by our
Engineering Department. Errors and questions regarding
specifications will delay orders. Note:Ontime Circuits'
responsibility is strictly limited to board fabrication.
|
|
|
Included
Standards:
-
Plated through holes not less
than .012 finished
-
SMT not less than .020 pitch
-
One silk screen (characters)
white only
-
LPI soldermask top and bottom,
green only
-
FR-4 standard material
manufactured to .062 thickness
-
Standard one ounce finished
copper
-
Route design limited to single
pass
-
No less than 7/7 space trace
-
Board size must not exceed 14"
nor be less than 1" in any dimension
-
Total sq. inches must not exceed
110
-
Orders are manufactured from
Gerber files.
-
Number of drilled holes under
this standard must not exceed 25 per square inch.
-
We typically ship via Fedex and
UPS, but most other carriers are acceptable. We will pre-pay
and add shipping costs to invoice, unless instructed
otherwise. In addition to a preferred carrier, you should
specify the type of service needed (Next Day, Second Day,etc.).
|
|
|
Optional Extras:
|
|
|
|
|
|
